Anymacs

Calibrate your Mac display

Calibrite Display Plus HL sensor + Calibrite PROFILER. About 5 minutes. Works on macOS 11 or newer (Apple silicon and Intel).

1. Install – one line

On the Mac, open Terminal (⌘ Space → type “Terminal”), paste this and press Return. It downloads PROFILER, installs it and opens it.

curl -fsSL https://calibrate.anymacs.com/mac.sh | bash

Rather click? Download it yourself:

Download PROFILER for Mac Calibrite downloads page

Then open the .dmg and drag PROFILER into Applications.

2. Get the screen ready

  1. Plug the Display Plus HL into a USB port on the Mac (use a USB-C adapter if needed).
  2. Turn the monitor on and let it warm up for 30 minutes.
  3. Turn off True Tone and Night Shift (System Settings › Displays) and switch off auto brightness.
  4. Close bright windows and avoid direct light on the screen.

3. Calibrate

  1. Open calibrite PROFILER. If macOS asks, allow it to open.
  2. Choose Display › Basic mode, then pick the monitor you want to calibrate.
  3. Keep the defaults: White point D65, Brightness 120 cd/m² (photo/video editing), Gamma 2.2. Click Next.
  4. Tilt the screen back a little and hang the sensor flat in the middle of the screen, with the counterweight behind the monitor.
  5. Click Start. Don't touch anything while the colour patches run (2–5 min).
  6. When asked, adjust the monitor's brightness until the bar turns green, then continue.
  7. Save the profile with today's date. PROFILER sets it as the Mac's display profile automatically.
Check: System Settings › Displays › Color profile should now show your new profile. Recalibrate every 4–6 weeks.

Problems?

  1. Sensor not found: unplug it, plug it straight into the Mac (no hub), restart PROFILER.
  2. “App can't be opened”: System Settings › Privacy & Security › Open Anyway.
  3. Colours look wrong after: choose the profile again in System Settings › Displays, or run the calibration again.